loading
reading
writing
saving
searching
McIntosh Stereo Amplifier MA6300 Pristine Condition Box Remote Papers - $4,500
QR Code Link to This Post
"Blue eyes" shine bright and clean.
Comes with original McIntosh Box and McIntosh Remote Control.
The remote control was never used and is still brand new.
Built in Binghamton, New York, USA
Currently powering a set of Bowers and Wilkins DM604 S3 and Bowers and Wilkins ASW650 12" Powered Sub.
Sounds absolutely incredible.
$4500
Only trade I may be interested in is a Martin D-42 or Guild D-55 or F-55 acoustic guitar. Guitar must be pristine as is the McIntosh.
Calls only. Texts and emails will be treated as spam and ignored.
(7l6)783-43seven8
Michael
McIntosh Spec Sheet (Copy/Paste link in your browser):
https://www.mcintoshlabs.com/-/media/Files/mcintoshlabs/DocumentMaster/us/1773_MA6300.pdf?revision=c52f7a43-a6be-4afd-a046-98a5345a33df
The MA6300 is the latest integrated amplifier, rich with all the premium technologies that
McIntosh is famous for including Power Assurance System and Silent Electromagnetic
Switching. With 100 watts per channel at 8-Ohms and 160 watts into 4-Ohm loads, the
MA6300 can effortlessly power virtually any speaker from one of seven source selections:
CD1, CD2, Tuner, Phono, Tape, TV and DVD.
Featured in the MA6300 is a dedicated, high performance headphone amplifier boasting
low noise, extended frequency response and featuring ample gain to drive the finest quality
headphones to life-like levels. A robust ¼” front panel jack is easily accessible and provides
for years of personal listening enjoyment.
A pair of distinctive “blue eyes” output meters highlights the Fiber-Optic Illuminated Glass
front panel from which the controls for Balance, Volume, Mute, Standby/On, and the seven
Source Selection Buttons are all readily accessible. A turn on delay prevents annoying pops
or thumps while protecting loudspeakers.
Only McIntosh can combine two basic audio components into a single instrument and still
retain traditional McIntosh performance, quality and reliability. The MA6300 provides all of
this in a more compact, space saving configuration. Those considering a McIntosh system
for the first time will find the MA6300 a very comfortable place to start.
POWER OUTPUT
100 watts into an 8 Ohm load is the minimum
sine wave continuous average power output.
The output RMS voltage is 28.3V across 8 Ohms.
160 watts into a 4 Ohm load is the minimum sine
wave continuous average power output. The output
RMS voltage is 25.3V across 4 Ohms.
OUTPUT LOAD IMPEDANCE
8 and 4 Ohms
RATED POWER BAND
20Hz to 20kHz
TOTAL HARMONIC DISTORTION
0.005% max harmonic distortion at any power level
from 250 milliwatts to rated power, 20Hz to 20kHz
DYNAMIC HEADROOM 1.4dB
FREQUENCY RESPONSE
+0, -0.5dB from 20Hz to 20kHz
+0, -3dB from 10Hz to 100kHz
PREAMPLIFIER MAIN OUTPUT
1V for rated input (8V maximum)
SENSITIVITY (FOR RATED OUTPUT)
High level: 250mV unbalanced, 500mV Balanced;
Phono: 2.5mV; Power Amp In, 1V
SIGNAL-TO-NOISE RATIO (A-Weighted)
High Level: 97dB below rated output
Phono: 90dB below 10mV input
Power Amplifier: 110 below rated output
INTERMODULATION DISTORTION
0.005% max, if the instantaneous peak power
output is rated power or less per channel with both
channels operating for any combination
of frequencies from 20Hz to 20kHz
WIDE BAND DAMPING FACTOR
200 at 8 Ohms; 100 at 4 Ohms
INPUT IMPEDANCE
High Level: 20K Ohms; Phono: 47K Ohms: 65pF;
Power Amp In: 10K Ohms
MAXIMUM INPUT SIGNAL
High Level: 8V; Phono: 90mV;
Power Amplifier In: 8V
MAIN OUTPUT IMPEDANCE 50 Ohms
POWER GUARD
Less than 2% THD with up to
16dB overdrive at 1000Hz
VOLTAGE GAIN
High Level to Tape Output: 0dB
High Level to Main Output: 12dB
Phono to Main Output: 52dB
POWER REQUIREMENTS
100/110 Volts, 50/60Hz at 3.6 amps
120 Volts, 50/60Hz at 3.2 amps
220/230/240 Volts, 50/60Hz at 1.8 amps
OVERALL DIMENSIONS (HxWxD)
7-5/8” (19.4cm) x 17-1/2” (44.5cm) x 22”
(55.9cm) including front panel and knobs.
WEIGHT
37 lbs. (16.8kg) net, 55 lbs. (24.9kg) boxed